Let’s talk about your Dented Garage Door – The appearance of an object speaks volumes about its performance.
The same with the garage door, there must be something wrong with it, not just in presence, but in how it works as well if it is dented.
Fortunately, garage door repairs are commonly offered these days.
There are a lot of companies that provide this kind of service.
On the other hand, homeowners can also do the fixing on their own.
However, it should be noted that if the dent is beyond repair, it might need a new panel or a whole replacement itself.
With the right tools and steps, here is how to fix a dented garage door.
Remove the dent with a hammer.
For a do-it-yourself garage door repair, the simplest way is to remove the dent by hammering it out with a hammer.
If the dent has been bothersome and you are irking to get your hands on it immediately, this is the first technique you should try out.
Get a hammer and a square wood and hold it against the door’s bulging side of the dent and hammer it out against the dent’s tap.
This is a basic repair; thus, if it still does not mend the door, try out other few things that could.
Use a lighter along with compressed air.
The more complicated the method is, the higher the chance that it will actually work.
Using a lighter and compressed air as a method sounds a bit complicated, but it does have its worth.
Begin by cleaning the area using water and dish soap and let it dry for a while.
Grab some aluminium foil along with a lighter, and a compressed air stored in a can.
You have to spread the foil across the surface of the dent and keep it there as the lighter run over the dent.
Then, pull off the foil and spread the compressed air at the dented spot for a while holding the can upside down.
This method is effective because of the temperature change.
Utilize the suction cup method.
While this technique is typically found at automatic body shops, it is also handy on repairing garage doors.
Simply put the suction cup on the dented spot of the garage door and pull the dent by using the cup.
You can get a suction cup from a nearby hardware store or an auto body shop.
Fill in the dent.
If you have tried the tips mentioned above and to no avail, filling in the dent might just do the trick.
Begin by sanding down the garage door’s dented spot and add a little of that auto body hardener while following the instructions given by the product.
You can then put the filler on the spot to smooth out the dented area.
Let it dry and sand it down once again to further smoothen the area.
You will need to get a prime to put on the spot and paint the whole garage door so that the filler will blend in with the entire makeup.
Call a garage door repair professional.
Not all of these methods may work on all garage door dents.
Depending on the depth and situation, the dent may not be repaired using a do-it-yourself approach.
If that is the case, it is time to call a professional on the job.
They can check what is wrong and analyze the best course of action better than you.
Expert technicians on garage door repair exist for this particular reason.
Sure, it might cost you for repairs, but you can rest assured that the door will be just fine.
As a homeowner, a person should know when to use a do-it-yourself method and when not to.
The thing is when it comes to garage doors, experts know better.
If left on the hands of the owners themselves without prior experience or knowledge on the matter, it could turn terrible and may even require more repairs than expected.
The garage door, especially its opener, has delicate parts that need to be handled expertly.
Like the people living in Mississauga, Markham, Newmarket, and Toronto, you can contact a repair professional too.