Table of Contents
Steel Garage Door Repair Mississauga
Steel garage door tune-up is important nowadays.
People are only starting to realize that as the quarantine restrictions are slowly being lifted.
Months of inaction should have caused the garage doors to be in perfect shape.
However, that is not the case at all.
Steel garage doors are common.
It is mostly for commercial use, the overhead doors preferred by industrial establishments due to its heavy-duty properties that can weather almost anything.
Still, there are homeowners that prefer this type of door.
Just like any other garage door, steel garage doors require close-up maintenance.
Here are some common problems with steel garage doors.
Common Steel Garage Door Problems
Steel comes with rust.
The process of rust formation takes long and the tune-up for it is pretty easy.
When rust forms on the door, it affects its performance.
That is because there’s corrosion going on.
So when you see rust, there are two ways you can deal with it.
With a sponge, rub some vinegar or some dish soap until all of the rust is gone.
Rust is natural, and it forms when the steel is exposed to water and air.
When the garage door is shaking and vibrating, there must be something wrong with its opener.
The opener is situated on the garage door’s ceiling.
Once it opens, the opener may be hit from time to time, causing it to slightly move from its original place.
If that happens to the steel doors, call for a garage repair company to install anti-vibration pads.
If you are from Mississauga, we can simply install these for you.
Broken Roller Bearings
Roller bearings, no matter what material it is made of, tend to wear off and break.
When it does, there is no way to fix it.
It can only be replaced, and it should be done fast before it affects the tracks and cables of your garage door.
With broken roller bearings, it is not advisable to do the reparation yourself.
There is an intricate process of measurements and having to move the door, and steel doors are much heavier than other types of garage doors.
For steel overhead doors, the weather sealant’s purpose is not only to keep unwanted elements out, but it also aims to lessen the noise.
The weather sealant tends to give way as time passes.
You will notice gaps and spaces on your door when the weather sealant is wearing off.
The simple fix to that is to replace the weather sealant, which you can do yourself.
Unlubricated Axles and Pulleys
Axles and pulleys cause false positives.
Unlubricated axles and pulleys cause tension and can produce sounds that may seem alarming.
However, if left untouched for a long time, it does get dangerous.
The cables will either be stuck or unravel on the axle or pulley and a mirage of problems will happen with every part of the door.
Lubricating these parts of the garage door with lithium or silicone-based lubricants will help keep these in shape.
Broken Torsion Springs
Torsion springs are the type of springs that twist around the shaft as the garage door opens.
It is what enables you to open the door with your hand.
There is something wrong with your torsion spring there’s resistance when you open your garage door.
Once the torsion spring breaks, there is no way to put it back together.
Both torsion springs are replaced.
Torsion springs replacement are not for DIY or spring break projects.
The process of replacing torsion springs is difficult and requires tools that may not be in your shed.
Getting it wrong will cause the whole door to collapse on whatever is under it.
A steel garage door presents more hazardous consequences.
Steel garage door tune-up is often left at the hands of professionals.
That is not to discourage anyone from doing basic tune-up from their homes.
Some of the things on this list can be done at home.
It is always encouraged to have a trusted garage repair service company to call for both maintenance and repairs.
If you are near or in Mississauga, our garage door repair company offers an array of services to maintenance to keep your garage door in shape.
So call now.