Table of Contents
Garage doors are essential parts of a garage storage’s safety.
It is the brain and mechanism that allows for adequate security and transactions whenever you need it.
Despite having only the fundamental function of opening and closing, it is an integral part of the whole package.
Suffice it to say, it is not a useful garage without the door smoothly doing its job.
If you have ever wondered what keeps these doors going in terms of its operations, the answer is garage door rollers.
They let your doors slide in and out – open and close – safely and smoothly.
Of course, just like any other parts of a machine, rollers can be damaged as well.
When the damage occurs, it can be a nasty business.
Nevertheless, you do not need to worry.
Garage door repairs can be done even by yourself.
Here are six tips in repairing garage door rollers:
Reinforce the bolts and the nuts
Sometimes, the bolts and nuts keeping the rollers together may loosen after a long period of time.
When this happens, your garage door rollers will face dysfunction and derailment.
Of course, as a result, the door itself will be blocked from performing its primary function and may even move sideways and off the track.
Without the rollers being fastened tightly, the overall performance of the door.
It is best if you tighten the bolts and other screws of the rollers every once in a while to prevent it from loosening.
Check for malfunction of rollers and hinges
A lot of rollers comes with an unexposed endurance in terms of keeping the door on the track.
However, it tends to be damaged at a certain period, causing doors to be all wobbly and derailed when it works.
To prevent damages and eventually fix it if there is one, check the rollers and the door’s hinges if there is a malfunction in its operation.
Examine the springs
Many garage doors use torsion springs to keep it afloat and to work.
Oftentimes, these springs contribute to the dysfunction of the rollers.
If you are planning on replacing the damaged rollers, examine first if the door is using torsion springs.
If it is, do not replace the rollers on your own.
It is recommended that you hire professional help, especially in fixing the springs.
Take a look at the opener chain
There might be a loose garage door opener chain that is facing complications.
When that happens, it may result in a twitchy movement of the door that may push the rollers against the door’s tracks.
Hence, you should examine the opener and fasten its chain as much as you can time after time.
You can also lubricate the door opener’s track to steer clear from any damages that may occur to the rollers.
Look for the damaged rollers
When the door is malfunctioning due to the rollers, it might be because of the damage of one or two of them.
Before you repair damaged garage door rollers, identify first which of them is broken.
Except for the roller at the bottom, if any of the rollers on the other sides are damaged, you can choose to remove the hinge by utilizing the appropriate size socket.
Check first which roller you need to fix before actually fixing it.
Replace the rollers
If it all comes down to the worst, you should opt for a replacement.
If you plan to do it on your own, the replacement should be performed with the garage door in a completely closed position to prevent the door’s panel from dropping.
After you remove the hinge, you can replace the broken roller and put it in the vertical track and then return the hinge.
However, if the broken one is at the bottom, do not remove the bracket.
The essential parts are always difficult to fix especially if it makes the whole better.
If you think you are not skilled enough to repair the damages on your own, there is no shame in asking for help.
It is always better to seek help from a professional or even to simply ask for an opinion or check-up regarding the trouble surrounding your garage door rollers.