Broken Garage Door Rollers, Hinges & Sensors

    Broken Garage Door Rollers, Hinges & Sensors

    Need your garage door fixed ASAP? Looking for professional maintenance services?

    When it comes to a garage door repair in Mississauga, You need an expert you can count on. Our technicians are standing by to take your call.

    CALL NOW: ☎️ (647) 6973192

    Or, fill out the following form and we will contact you as soon as possible


    Show us the damage: Send us some photos for a FREE cost estimate.

    Our service areas include: Ajax, Pickering, Scarborough, North York, Markham, Vaughan, Etobicoke, Brampton, Mississauga and the Toronto area

    Broken Garage Door Rollers, Hinges & Sensors Not Functioning? We Can Help!

    We all know that garage doors are very sturdy, reliable, and just downright secure.

    However, even the man of steel has a weakness, so does garage doors.

    A stuck garage door is a universal issue that has an easy fix to the problem.

    If there is a fault with any part of your garage roller door, it’s hard to know what went wrong, why it happened or what you can do to fix it.

    However, every garage door problem has a solution.

    From broken sensors, broken rollers repair, garage doors getting stuck, and the garage door simply not opening, your repairman in the Greater Toronto Area (GTA) shall handle these problems right now and shall give you tips on how to work around it.

    Garage door not opening? Here’s why

    You are hurrying out of the house, and your garage door is simply not opening?

    It’s stuck or is only opening halfway, can’t get your car out? Maybe the power source has been disrupted in some way.

    Always check the power source if it has been unplugged or the wire has been damaged.

    A quick fix will be putting the power source on again.

    However, your garage door needs intensive repair if the cables or rollers are broken.

    One reason why rollers on garage doors can get damaged is their material.

    Rollers last just a couple of years.

    The bearings housing can become loose.

    That causes the bearings to leap out of place.

    This, in turn, causes roller malfunction.

    The door weight can be another cause the rollers struggle to work.

    Heavy garage doors are putting more pressure on the bearings.

    Over time, that wears down the rollers.

    Crooked tracks will make the rollers uneven too.

    Something you don’t want happening is to have your sensors broken, too.

    Having a sensor that needs repair is always costly as it is one of the expensive techs in a garage door.

    But it will also totally affect everything about it.

    broken sensor will forever be a liability to a garage.

    Being overly sensitive and vice versa can lead to problems and even dangerous situations if not taken care of properly.

    Effects of broken garage door roller, hinges and sensors

    Broken sensors, worn hinges, and malfunctioning sensors can cause a lot of trouble to the garage door’s operation and malfunction of garage doors can cause the garage door to be inoperable.

    Fixing your garage door would result in the garage door being correctly handled, and the process will become quieter.

    What to do when you have broken rollers, hinges, and sensors?

    If you know your garage rollers are working poorly, call Fixadoor experts in the Greater Toronto Area.

    Our Garage repair technicians located in the GTA will get your garage the right rollers and do so in a non-intrusive manner.

    When you have broken rollers, do not hesitate to call for assistance and repair.

    The sooner the issue is fixed, the safer it will be out of your house.

    Tags: garage door parts, garage door panel repair parts, garage door parts supplier, garage door hinges and rollers, garage door parts richmond hill, up and over garage door parts

    Garage Door Repairs tips, recommendations and frequently asked questions

    Why does my garage door opener light bulb keep dying?

    First, check for any shaking of the garage door during operation. Usually, excessive vibration can cause the filament in your opener's bulb to prematurely expire.

    One garage spring broke. I have 2, should I replace both?

    Garage door springs should ALWAYS be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.

    Does my garage door require maintenance?

    Yes. How often you will require garage door maintenance all depends on how much the door is being used. Generally, we perform the following to ensure your garage door is working properly and tuned up: We do a visual inspection of all the moving parts. We ensure the tracks; rollers and hinges are clean and lubricated properly. We make sure all nuts and bolts are tight and clean. We manually run the operator and door through a cycle to make sure it is running quietly and smoothly. Also, We check the door balance at various opening heights. If the garage door passes all these test, congratulations, you do not need a tune-up.

    Can I use the old tracks for a new garage door?

    Using old garage door tracks with a new garage door is quite dangerous. Surprisingly or not, many home and business owners try to reduce costs on a new garage door installation by reusing their old garage door track with new panels. While this might reduce the cost, the new door can get damaged faster than normal and derail.

    How hard is it really to replace a garage door?

    Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous. You should call a professional garage door technician.

    How long does it take to change a garage door?

    if done properly, roughly 3 to 4 hours.

    Contact Us
    Contact Us!

    Fixadoor garage door repair logo

    Facing an emergency?
    Need your garage door fixed asap?
    Looking for a professional routine repair and maintenance job?

    CALL NOW: ☎️ (647) 6973192

    Or, leave us a message HERE.

    Our service areas include:
    Ajax, Pickering, Scarborough,
    North York, Markham, Vaughan,
    Etobicoke, Brampton, Mississauga
    and the Toronto area.