Garage Door Off Track Repair Mississauga
Our garage door repair company offers repairs on different overhead off-track problems.
There are several reasons why a door pops off of its tracks, and the repair is not as easy as pushing it back in.
The thing about garage doors going off track is that it causes the door to misalign.
With that, the tension on the cables, wirings, axles, and pulleys are uneven.
That also adds tension to the springs on the doors that can cause it to break.
When a garage door is off track, immediately call for a garage door repair company to repair the damages to halt the progress of further damage on your overhead door.
Here are some of the common reasons as to why garage doors come off track.
Common Garage Door Off Track Reasons
Loose or Dried up Roller Bearings
Roller bearings are made up of metal, nylon, or industrial-grade plastic.
These bearings tend to dry out from time to time.
Simple loose or dried up roller bearings can cause a significant amount of damage when not addressed.
When the door opens, there’s friction between the rollers and the tracks, causing the rollers to pop off.
To prevent dried up roller bearings, you simply need to use lithium or silicone-based sprays.
However, a loose roller bearing needs replacement.
A professional technician is best at handling the process of replacing the roller bearings.
First, a garage door repair company have direct suppliers that provide top of the line commercial grade roller bearings.
Second, for the garage door, the replacement needs to be measured.
It is not as easy as it sounds.
When your garage door tracks have been bumped into or are old and becoming bendy, then the door will naturally come off track.
The horizontal tracks receive a staggering weight of an average of 300 to 400-pound door.
The slightest impact on a wearing garage door can cause the track to come off easily.
When the doors are not aligned, there’s tension on your track reinforcements, In turn, the bracket bolts that hold it will loosen, allowing the tracks to bend further.
The simple reparation process for that is to replace the tracks.
On both sides of the door, there are two lift cables.
These lift cables wind up around the drum as the opener operates.
When something bumps into the garage door, there is a chance that the cables will unravel.
Once the cable unravels, the door’s tension is unequal.
The outcome will cause the cables to snap due to tension and stress.
With the stress, the force that holds the door in place becomes loose and lets it loose off of its track.
Then your door is off track.
A simple hit from a car can cause the garage door to pop off of its track.
Not only that, but it can also cause the track to misalign, and then the force will cause the cables to snap.
The force also causes the rollers to fall off of its tracks.
The best way to address this is to exit the garage immediately, do not engage.
Call for a garage door repair company to do it for you because the door is too heavy.
The impact has already caused significant damage, even if you don’t feel like the bump was too strong.
When it comes to garage door off track problems, it is always a domino effect.
That is why homeowners are asked to do garage door maintenance every month.
Garage Door Track Maintenance
- Lubricate Rollers and Track
Always lubricate the rollers and track at least three times a year with lithium or silicone-based lubricant.
Make sure that these parts are clean because build-up debris can become false positive reasons for broken rollers.
- Monthly Inspection
Inspect your garage door every month.
Similarly, have a professional technician from a trusted garage door repair company do garage door inspections and inspect the areas that you might have missed.
- Tighten Bolts and Cables
These areas are often overlooked.
Tighten the bolts and cables to make sure that it won’t unravel quickly and fix anything wrong easily.
Our garage door repair company is located in Mississauga.
Garage Door Repairs tips, recommendations and frequently asked questions
Why does my garage door opener light bulb keep dying?
First, check for any shaking of the garage door during operation. Usually, excessive vibration can cause the filament in your opener's bulb to prematurely expire.
One garage spring broke. I have 2, should I replace both?
Garage door springs should ALWAYS be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.
Does my garage door require maintenance?
Yes. How often you will require garage door maintenance all depends on how much the door is being used. Generally, we perform the following to ensure your garage door is working properly and tuned up: We do a visual inspection of all the moving parts. We ensure the tracks; rollers and hinges are clean and lubricated properly. We make sure all nuts and bolts are tight and clean. We manually run the operator and door through a cycle to make sure it is running quietly and smoothly. Also, We check the door balance at various opening heights. If the garage door passes all these test, congratulations, you do not need a tune-up.
Can I use the old tracks for a new garage door?
Using old garage door tracks with a new garage door is quite dangerous. Surprisingly or not, many home and business owners try to reduce costs on a new garage door installation by reusing their old garage door track with new panels. While this might reduce the cost, the new door can get damaged faster than normal and derail.
How hard is it really to replace a garage door?
Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous. You should call a professional garage door technician.
How long does it take to change a garage door?
if done properly, roughly 3 to 4 hours.