Garage Door Remote Not Working? Here’s Why

    Need your garage door fixed ASAP? Looking for professional maintenance services?

    When it comes to a garage door repair in Mississauga, You need an expert you can count on. Our technicians are standing by to take your call.

    CALL NOW: ☎️ (647) 6973192

    Or, fill out the following form and we will contact you as soon as possible


    Show us the damage: Send us some photos for a FREE cost estimate.

    Our service areas include: Ajax, Pickering, Scarborough, North York, Markham, Vaughan, Etobicoke, Brampton, Mississauga and the Toronto area

    Garage Door Remote Not Working? Here’s Why

    Steel Garage Doors

    Garage Door Remote Not Working? Here are Some of the Reasons Why.

    Automatic garage doors won’t function without the help of remotes.

    While they can still be operated manually, the whole essence of being automatic will be stripped away if they won’t work correctly.

    If you have encountered this predicament, you’re in the correct spot.

    This article will discuss why your automatic garage door remote won’t work, and several possible solutions that you can do.

    Batteries are Depleted

    Perhaps one of the common reasons why remotes would stop working is faulty or depleted batteries.

    It may apply to other device remotes as well.

    This reason isn’t that much severe and wouldn’t require a professional garage door repair specialist’s assistance.

    The standard life span of a garage door remote battery is two years, so if you haven’t checked on those for the said timeframe, it is best to do so as soon as possible to prevent more complications on the device.

    To make sure that your batteries are indeed depleted, you may use the manual control panel that can be found near the automatic door.

    If it works, you can safely assume that a battery replacement would fix the problem.

    Signal Disruption

    If, by any chance, that the remote batteries are new and they are intended to work, you may proceed to a signal disruption diagnosis.

    It is common for remotes not to function if they are being used very far from the receiver.

    You may try to stand at least 20 ft. From the receiver to check if it works.

    It is also worth noting that signals can be interrupted by walls, so if the receiver is having a sort of hindrance, try to make the adjustment yourself and find a position that can benefit the signal being transmitted from the remote.

    If things are still not working in your favor, a garage door repair may be needed to fix the receiver if it has any damage.

    Lock Button Active

    An engaged or active lock button can hinder your remote from adequately working.

    It doesn’t permit any command to enter, and a manual disengage is needed for a remote to function properly again.

    Most homeowners are regularly cleaning their garage, and if you’re one of them, there’s a high chance that you might have accidentally engaged the lock button.

    It’s somehow funny that a simple switch could cause all these problems, but luckily, everything can turn back to normal with just a simple press.

    Remote Programming Messed Up

    Garage door remotes operate differently, depending on the manufacturer.

    It is common knowledge that they can be reformatted or reprogrammed to their default state.

    While it may sound like a complicated task, most manufacturers include manuals on remote packaging, so it is a lot easier to follow how a reprogramming could be done.

    It is mainly done for the remote to become in-sync with the receiver once again.

    To know if the reprogramming is successful, you can try doing an open and close cycle.

    If you’re not that confident with your technical skills, you can call for a reliable backup in garage door renovation and repair specialists.

    Not only that, they know how remote works, but they are also quite knowledgeable on at least several manufactured models.

    Garage Door System Malfunction

    Sometimes, the problem might not be even on the remote, but on the door system itself.

    More specifically, you can look at the control wiring inside, or maybe even on the receiver board.

    Before you dive into more complicated tasks, you should try a power cycle.

    You can do this by unplugging and replugging the power on the socket.

    The wires can also be disconnected as a way to reset the system.

    Once done, you may take your remote control and see if everything works on your end.

    Takeaway

    A garage door remote control isn’t necessarily neglected, but it can often produce challenges that are difficult to solve.

    With this comprehensive list, we hope that we have helped you point out what needs to be addressed and what problems need solving.

    If you’re someone who lives in Etobicoke, North York, Ajax or Toronto, a professional garage door fix specialist might be near your area.

    If you’re unsure of what to do with your remote, an expert is what you need.

    Garage Door Repairs tips, recommendations and frequently asked questions

    Why does my garage door opener light bulb keep dying?

    First, check for any shaking of the garage door during operation. Usually, excessive vibration can cause the filament in your opener's bulb to prematurely expire.

    One garage spring broke. I have 2, should I replace both?

    Garage door springs should ALWAYS be replaced as a set. The reason is once one spring breaks, the other one is probably not far behind, especially considering how springs weaken over time. Combining a new spring with an older one will likely cause an imbalance in your garage door's operation. If you own 2 separate garage doors and only one spring has broken, it's strongly recommended to replace the springs on each door if their springs are around the same age. Depending on your door's position, when a spring breaks it can cause serious injury as well as damage your opener.

    Does my garage door require maintenance?

    Yes. How often you will require garage door maintenance all depends on how much the door is being used. Generally, we perform the following to ensure your garage door is working properly and tuned up: We do a visual inspection of all the moving parts. We ensure the tracks; rollers and hinges are clean and lubricated properly. We make sure all nuts and bolts are tight and clean. We manually run the operator and door through a cycle to make sure it is running quietly and smoothly. Also, We check the door balance at various opening heights. If the garage door passes all these test, congratulations, you do not need a tune-up.

    Can I use the old tracks for a new garage door?

    Using old garage door tracks with a new garage door is quite dangerous. Surprisingly or not, many home and business owners try to reduce costs on a new garage door installation by reusing their old garage door track with new panels. While this might reduce the cost, the new door can get damaged faster than normal and derail.

    How hard is it really to replace a garage door?

    Installing a garage door isn't as simple as installing a regular door. More so, installing it incorrectly can be dangerous. You should call a professional garage door technician.

    How long does it take to change a garage door?

    if done properly, roughly 3 to 4 hours.

    Contact Us